VMAlert #

VMAlert - executes a list of given alerting or recording rules against configured address.

The VMAlert CRD declaratively defines a desired VMAlert setup to run in a Kubernetes cluster.

It has few required config options - datasource and notifier are required, for other config parameters check doc .

For each VMAlert resource, the Operator deploys a properly configured Deployment in the same namespace. The VMAlert Pods are configured to mount a list of Configmaps prefixed with <VMAlert-name>-number containing the configuration for alerting rules.

For each VMAlert resource, the Operator adds Service and VMServiceScrape in the same namespace prefixed with name <VMAlert-name>.

Specification #

You can see the full actual specification of the VMAlert resource in the API docs -> VMAlert .

If you can’t find necessary field in the specification of the custom resource, see Extra arguments section .

Also, you can check out the examples section.

Rules #

The CRD specifies which VMRules should be covered by the deployed VMAlert instances based on label selection. The Operator then generates a configuration based on the included VMRules and updates the Configmaps containing the configuration. It continuously does so for all changes that are made to VMRules or to the VMAlert resource itself.

Alerting rules are filtered by selectors ruleNamespaceSelector and ruleSelector in VMAlert CRD definition. For selecting rules from all namespaces you must specify it to empty value:

      spec:
  ruleNamespaceSelector: {}
    

VMRule objects generate part of VMAlert configuration.

For filtering rules VMAlert uses selectors ruleNamespaceSelector and ruleSelector. It allows configuring rules access control across namespaces and different environments. Specification of selectors you can see in this doc .

In addition to the above selectors, the filtering of objects in a cluster is affected by the field selectAllByDefault of VMAlert spec and environment variable WATCH_NAMESPACE for operator.

Following rules are applied:

• If ruleNamespaceSelector and ruleSelector both undefined, then by default select nothing. With option set - spec.selectAllByDefault: true, select all vmrules.
• If ruleNamespaceSelector defined, ruleSelector undefined, then all vmrules are matching at namespaces for given ruleNamespaceSelector.
• If ruleNamespaceSelector undefined, ruleSelector defined, then all vmrules at VMAlert’s namespaces are matching for given ruleSelector.
• If ruleNamespaceSelector and ruleSelector both defined, then only vmrules at namespaces matched ruleNamespaceSelector for given ruleSelector are matching.

Here’s a more visual and more detailed view:

More details about WATCH_NAMESPACE variable you can read in this doc .

Here are some examples of VMAlert configuration with selectors:

      # select all rule objects in the cluster
apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: select-all
spec:
  # ...
  selectAllByDefault: true

---

# select all rule objects in specific namespace (my-namespace)
apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: select-ns
spec:
  # ...
  ruleNamespaceSelector: 
    matchLabels:
      kubernetes.io/metadata.name: my-namespace
    

High availability #

VMAlert can be launched with multiple replicas without an additional configuration as far alertmanager is responsible for alert deduplication.

Note, if you want to use VMAlert with high-available VMAlertmanager , which has more than 1 replica. You have to specify all pod fqdns at VMAlert.spec.notifiers.[url]. Or you can use service discovery for notifier, examples:

• alertmanager:
        apiVersion: v1
  kind: Secret
  metadata:
    name: vmalertmanager-example
    labels:
      app: vm-operator
  type: Opaque
  stringData:
    alertmanager.yaml: |
      global:
        resolve_timeout: 5m
      route:
        group_by: ['job']
        group_wait: 30s
        group_interval: 5m
        repeat_interval: 12h
        receiver: 'webhook'
      receivers:
        - name: 'webhook'
          webhook_configs:
            - url: 'http://alertmanagerwh:30500/'
    # ...
  
  ---
  
  apiVersion: operator.victoriametrics.com/v1beta1
  kind: VMAlertmanager
  metadata:
    name: example
    namespace: default
    labels:
     usage: dedicated
  spec:
    replicaCount: 2
    configSecret: vmalertmanager-example
    configSelector: {}
    configNamespaceSelector: {}
    # ...
      

• vmalert with fqdns:
        apiVersion: operator.victoriametrics.com/v1beta1
  kind: VMAlert
  metadata:
    name: example-ha
    namespace: default
  spec:
    replicaCount: 2
    datasource:
      url: http://vmsingle-example.default.svc:8428
    notifiers:
      - url: http://vmalertmanager-example-0.vmalertmanager-example.default.svc:9093
      - url: http://vmalertmanager-example-1.vmalertmanager-example.default.svc:9093
    evaluationInterval: "10s"
    ruleSelector: {}
    # ...
      

• vmalert with service discovery:
        apiVersion: operator.victoriametrics.com/v1beta1
  kind: VMAlert
  metadata:
    name: example-ha
    namespace: default
  spec:
    replicaCount: 2
    datasource:
     url: http://vmsingle-example.default.svc:8428
    notifiers:
      - selector:
          namespaceSelector:
            matchNames: 
              - default
          labelSelector:
            matchLabels:
                usage: dedicated
    evaluationInterval: "10s"
    ruleSelector: {}
    # ...
      

In addition, you need to specify remoteWrite and remoteRead urls for restoring alert states after restarts:

      apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: example-ha
  namespace: default
spec:
  replicaCount: 2
  evaluationInterval: "10s"
  selectAllByDefault: true
  datasource:
    url: http://vmselect-demo.vm.svc:8481/select/0/prometheus
  notifiers:
    - url: http://vmalertmanager-example-0.vmalertmanager-example.default.svc:9093
    - url: http://vmalertmanager-example-1.vmalertmanager-example.default.svc:9093
  remoteWrite:
    url: http://vminsert-demo.vm.svc:8480/insert/0/prometheus
  remoteRead:
    url: http://vmselect-demo.vm.svc:8481/select/0/prometheus
    

More details about remoteWrite and remoteRead you can read in vmalert docs .

Version management #

To set VMAlert version add spec.image.tag name from releases

      apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: example
spec:
  image:
    repository: victoriametrics/vmalert
    tag: v1.110.13
    pullPolicy: Always
  # ...
    

Also, you can specify imagePullSecrets if you are pulling images from private repo:

      apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: example
spec:
  image:
    repository: victoriametrics/vmalert
    tag: v1.110.13
    pullPolicy: Always
  imagePullSecrets:
    - name: my-repo-secret
# ...
    

Resource management #

You can specify resources for each VMAlert resource in the spec section of the VMAlert CRD.

      apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: resources-example
spec:
    # ...
    resources:
        requests:
          memory: "64Mi"
          cpu: "250m"
        limits:
          memory: "128Mi"
          cpu: "500m"
    # ...
    

If these parameters are not specified, then, by default all VMAlert pods have resource requests and limits from the default values of the following operator parameters :

• VM_VMALERTDEFAULT_RESOURCE_LIMIT_MEM - default memory limit for VMAlert pods,
• VM_VMALERTDEFAULT_RESOURCE_LIMIT_CPU - default memory limit for VMAlert pods,
• VM_VMALERTDEFAULT_RESOURCE_REQUEST_MEM - default memory limit for VMAlert pods,
• VM_VMALERTDEFAULT_RESOURCE_REQUEST_CPU - default memory limit for VMAlert pods.

These default parameters will be used if:

• VM_VMALERTDEFAULT_USEDEFAULTRESOURCES is set to true (default value),
• VMAlert CR doesn’t have resources field in spec section.

Field resources in VMAlert spec have higher priority than operator parameters.

If you set VM_VMALERTDEFAULT_USEDEFAULTRESOURCES to false and don’t specify resources in VMAlert CRD, then VMAlert pods will be created without resource requests and limits.

Also, you can specify requests without limits - in this case default values for limits will not be used.

Enterprise features #

VMAlert supports features Reading rules from object storage and Multitenancy from VictoriaMetrics Enterprise .

For using Enterprise version of vmalert you need to

• specify license at spec.license.key or at spec.license.keyRef .
• change version of vmalert to version with -enterprise suffix using Version management .

Reading rules from object storage #

After that you can pass -rule command-line argument with s3:// or gs:// to VMAlert with extraArgs .

More details about reading rules from object storage you can read in vmalert docs .

Here are complete example for Reading rules from object storage :

      apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: ent-example
spec:
  # enabling enterprise features
  license:
    keyRef:
      name: k8s-secret-that-contains-license
      key: key-in-a-secret-that-contains-license
  image:
    tag: v1.110.13-enterprise
  extraArgs:
    # using enterprise features: Reading rules from object storage
    # more details about reading rules from object storage you can read on https://docs.victoriametrics.com/victoriametrics/vmalert/#reading-rules-from-object-storage
    rule: s3://bucket/dir/alert.rules
    
  # ...other fields...
    

Multitenancy #

After enabling enterprise version you can use Multitenancy feature in VMAlert.

For that you need to set clusterMode command-line flag with extraArgs and specify tenant field for groups in VMRule :

      apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: ent-example
spec:
  # enabling enterprise features
  license:
    keyRef:
      name: k8s-secret-that-contains-license
      key: key-in-a-secret-that-contains-license
  image:
    tag: v1.110.13-enterprise
  extraArgs:
    # using enterprise features: Multitenancy
    # more details about multitenancy you can read on https://docs.victoriametrics.com/victoriametrics/vmalert/#multitenancy
    clusterMode: true 

  # ...other fields...

---

apiVersion: operator.victoriametrics.com/v1beta1
kind: VMRule
metadata:
  name: ent-example
spec:
  groups:
    - name: vmalert-1
      rules:
        # using enterprise features: Multitenancy
        # more details about multitenancy you can read on https://docs.victoriametrics.com/victoriametrics/vmalert/#multitenancy
        - tenant: 1
          alert: vmalert config reload error
          expr: delta(vmalert_config_last_reload_errors_total[5m]) > 0
          for: 10s
          labels:
            severity: major
            job:  "{{ $labels.job }}"
          annotations:
            value: "{{ $value }}"
            description: 'error reloading vmalert config, reload count for 5 min {{ $value }}'
    

Examples #

      apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: example
spec:
  replicaCount: 1
  datasource:
    url: "http://vmsingle-example-persisted.default.svc:8428"
  notifier:
    url: "http://vmalertmanager-example.default.svc:9093"
  evaluationInterval: "30s"
  selectAllByDefault: true